How To Keep Tools From Rusting in Toolbox
How To Keep Tools From Rusting in Toolbox
5 (100%) 6 vote[s]

Anytime, you get a package in the mail, you know whether it’s sneakers, electronics, usually, they come with these little silica packets, they’re called. What these do is they prevent moisture from going into your electronic, your sneakers, your clothing and absorbent into here. What you want to do, pop opens your toolbox. Tools are very prone to rust, so what you want to do, grab a couple and just toss them in. Now, you’re going to shut the drawer Instead of the moisture going onto the tools, it’s going to want to go into, so that’ll prevent them from rusting up. That’s all you need to do.

How To Keep Tools From Rusting in Toolbox

One quick thing also is if you are getting rust, you can get it out. You want to get a rubbing compound. Don’t get heavy because you’ll actually scratch the tools. What you want to do is get like medium to mild cut. You could even mix it. If they only have a super duty, you can mix it with a wax or a polish to cut it down a little bit. Just put it on a rag, just lightly buff and this will come right off.

Video Guide: How To Stop Tools From Rusting


Hello! I’m a David Robinson, and I’m an experienced mounter. I have a lot of toolboxes for different tools. Therefore, I’m going to share my minds about it with you.

Related Posts

How To Remove Toolbox Drawers

How To Remove Toolbox Drawers

So I was cleaning my garage, and I had the toolbox set up. And on the top one, it does this thing where you cannot open the drawers unless you open the top lid. Well, that's great if you're going to move it a lot, but I don't move it pretty much at all. And…

How to Install a Truck Toolbox with Bed Lliner

How to install a truck toolbox with bed liner

It is great to have all your tools at hand if you are a happy owner of a truck. Most likely you use such a car for work or other special personal needs. If you need to take a repair kit with you, or for example, you are going away for the weekend, you need…

How to Open a Truck Toolbox Without the Key

How to open a truck toolbox without the key

You've lost your keys from the truck toolbox? Don't worry this job is quite easy to do it yourself. But of course, be ready to ruin your lock and get a new replacement lock and keys. To buy a suitable replacement unit read the serial numbers on the inside of your toolbox. But order the…

How To Modify Tonneau Cover for Tool Box Fitting

How To Modify Tonneau Cover for Tool Box Fitting

A garage, however small, is almost always seen as a storage place for everything we don't want to keep in the house. This is often due to the rather chaotic and virtually non-existent garage storage system, which ultimately results in a huge mess. But it doesn't have to be that way. Thoroughly clean your garage…

One Comment

  1. Thanks for creating this article. It has helped me have a tool box with tools that are not rusting anymore. I try to keep them in check and clean them from time to time to make sure I don’t end up getting them rusty.

Leave A Comment

Your email address will not be published. Required fields are marked *