Success usually comes to those who are too busy to be looking for it.Henry David Thoreau

How to Open Craftsman Tool Chest Drawers?

How to Open Craftsman Tool Chest Drawers?

Unlocking the drawers of your Craftsman Tool Chest can be a tricky task if you don’t use the correct method. Fortunately, it is quite simple to open these drawers with just a few steps. By following this guide, you will have all your tools organized and accessible in no time! If you’re a DIY enthusiast or just beginning to work on home improvement projects, understanding how to open Craftsman tool chest drawers can make your job faster and less aggravating. With this guide, we will walk through the process of correctly opening each drawer without damaging them or risking any injury.

How To Open Craftsman Tool Chest Drawers

Let us investigate the available solutions for unlocking a Craftsman Tool chest of drawers.

How To Open Rolling Drawer

Step 1: Find the latch that is located on the front of the drawer. It will look like a small loop and may be made of plastic or metal.

Step 2: Push in the loop, this will release the drawer from its locked position.

Step 3: Pull open the drawer slowly to ensure it does not pop open unexpectedly and potentially cause injury or damage.

How To Open Rolling Drawer

How To Open Friction Slide Drawer

For Craftsman tool chests, the reliable friction slide drawer locks are a must-have. If you are struggling to gain access to your tool chest, the following steps will help you open the lock:

  1. Start by testing the lock with a flat head screwdriver. Insert the cutting edge of the blade into the crevice between where the lock and drawer meet. If it goes in easily, the lock may be broken and easily removed.
  2. If your screwdriver fails to insert smoothly, employ a pair of needle-nose pliers in an effort to unlock the lock manually. Put one arm of the pliers into the gap where the lock meets the edge of the drawer and use the other arm to grip the lock. Gently twist the pliers in one direction until you can feel it start to open.
  3. Once the lock is opened, pull out the drawers using either your fingers or a flat head screwdriver to pry them open if needed. You should now be able to access all of your tools and supplies in the tool chest!
  4. If you still find yourself unable to open the tool chest drawers, then contact Craftsman or a local locksmith for assistance. With their help, you should be able to get your craftsmanship tool chest unlocked and back in working order.
  5. If you find yourself facing a dead end with all other options, Craftsman may be able to provide you with a new lock – but only as an absolute final attempt.

How To Open Friction Slide Drawer

How To Open Ball-Bearing Slide Drawer

If you own a Craftsman tool chest, it is likely that the drawers are equipped with ball-bearing slides for added convenience and ease. These slides allow you to effortlessly open and close your drawers, so that you can quickly grab the tools you need for whatever task lies ahead. However, over time, those same slides may wear out or become stuck in place, making it difficult to open the drawers. Thankfully, you can easily restore your tool chest drawers to their original strength and functionality.

  1. Start by pulling on the drawer handle as far out as possible. If the drawer won’t budge, lay a rubber mallet flat against the front of the stuck drawer and gently tap the mallet, working your way across the drawer. This should help to dislodge the slides from their current position.
  2. After you have released the slides, you can now proceed to reset them. For a Craftsman ball-bearing slide, depress both spring locks on either side of the drawer while pulling it out and then release them once the drawer is fully extended.
  3. Gently and slowly push the drawer back in place until it clicks into position. This should reset the slides and allow you to open and shut the drawer easily.If this doesn’t work, try repeating steps 1-3 a few more times before trying any other methods of resetting the slides. In some cases, the drawer may need to be adjusted slightly in order for the slides to function properly. If all else fails, you can find replacement slides at any home improvement store or online retailer. [1]

How To Open Deadbolt Lock

Keep your tools and supplies secure with the Craftsman tool chest drawers’ deadbolt locking system, a simple yet efficient way to protect your valuable items. To open the lock, you’ll need a key. Here’s how to do it:

  1. Insert the key into the cylinder of the lock, making sure that the key is in line with the arrows on either side of the cylinder.
  2. Turn the key clockwise until you hear a click, which indicates that it has been opened.
  3. Pull out on the key and simultaneously pull out on the handle of the drawer to open it.
  4. Once the drawer is open, remove the key and store it in a secure location until you need to use it again.

Always make sure that the lock is securely closed after each use. [2]

How To Open Deadbolt Lock

Remove The Drawer With The Whole Lock Mechanism

Before you can access the contents of a Craftsman tool chest, begin by removing the drawer and its integrated locking system. Depending on the make and model of your device, you will require either a flathead screwdriver or an Allen wrench to assemble it. Be sure to secure the drawer with two screws, one on each side. Once these screws are removed, gently pull out the drawer and the entire lock mechanism should come out with it.

Once you have the drawer and lock component removed, you can begin disassembling the lock separately. You’ll need to unscrew all of the screws from the back of the lock in order to access the inner workings. There are typically three or four screws per side, and the screws should be labeled on the lock itself.

After all the screws have been removed, you can now see the inner workings of the lock. Unlocking the drawers of a Craftsman tool chest is easy; simply locate the tiny tab situated near its center and you’re good to go. This tab will typically be marked with an arrow or the word “open.” Gently pull this tab out and the drawer should open. [3]

Remove The Lock From The Drawer

The first step to opening the drawers on a Craftsman tool chest is to remove the lock from the drawer. Depending on your particular model, there may be a key or combination that you will need to use in order to unlock it. If you have forgotten the key or combination, you can purchase one from Craftsman’s website. It’s important to remember to always lock your tool chest when you are done using it so that no one else can access your tools. [4]

Remove The Lock From The Drawer


How do you open the drawer on a Craftsman tool?

Unlocking the drawer on a Craftsman tool chest is easy—simply locate and press in the locking tab at the top of it. This will unlock the drawer and allow it to be opened. If the locking tab is in an awkward position, you can use a flathead screwdriver to push in the tab and unlock the drawer. Once you have opened the drawer, make sure it is locked again for safety before use.

How do you take a drawer out of a Craftsman toolbox?

Removing a drawer from a Craftsman toolbox is easy and straightforward. The drawers are designed with two tabs on each side, so you can simply pull up on the tabs to release the drawer. Once the drawer is released, you can then lift it out of the toolbox. It is important to be aware that each drawer is slightly different, so you may need to pull slightly harder on some drawers than others. When inserting a drawer back into the toolbox, be sure to press firmly until you hear the tabs click securely in place.

How do you open a craftsman lock?

Open a Craftsman tool chest drawer with the correct key or combination. To open a standard lock, insert a key into the cylinder on the side of the lock, turn it counter-clockwise and pull out. If you have a combination lock, enter your code into the numbered dials on the front of the lock and turn the cylinder as if it were a key. If you don’t know the key or combination to your locks, contact Craftsman customer service for assistance.

How do you pick a tool chest lock?

If you’ve lost the key to your Craftsman tool chest, there are a few ways you can pick the lock. To start, with a standard pin and tumbler lock, you can utilize traditional lock picking instruments to open it. To crack a lock, these tools come with various tension wrenches and pick tools that enable you to handle the pins inside of it so as to unlock it. An alternate option for Craftsman tool chests with combination locks is to “trace” the code. This involves feeling for subtle differences in the tolerance of the locking mechanism as you move through each number of the combination. To do this, you will need a stethoscope or some other device that can detect subtle differences in sound. Lastly, if all else fails, you can always drill out the lock with a power drill and replace it with another one. Ensure that you store your Craftsman tool chest key securely once you’ve opened the drawers to avoid any future inconveniences!

How does a toolbox lock work?

Most Craftsman tool boxes come with a lock, which can be used to secure the contents inside. This lock works by having a keyhole on the outside of the box that is opened with a key, and then when the key is turned it triggers a mechanism inside that locks all of the drawers shut. To open a locked Craftsman toolbox, you will need the key. If you do not have the key, there are ways to open it without damaging it.

Why can’t I open my drawer?

There could be a multitude of culprits behind your inability to open the drawers on your Craftsman tool chest. It could be that the drawer has been locked, or it is stuck due to a buildup of dirt and grime on the slides. If the drawer does not open after trying multiple times, you should check for worn out parts or missing screws that may be preventing it from opening. Also, make sure that the inner drawer rails are aligned properly, as misalignment can cause them to get stuck.

How do you release a drawer mechanism?

Before you can access your Craftsman tool chest, releasing the drawer mechanism is a necessary step. This can be done by locating and pressing the release lever located on the side of each drawer. The handle is usually black or gray in color, and is located along the bottom edge of the side panel. Pushing this lever downwards will allow the drawer to pull out freely. Alternatively, if your particular model has a lock system on it, simply unlock the drawers by turning the key that was provided.

How do you release a drawer?

There are two ways to release a drawer from a Craftsman tool chest. Depending on the model, you may open the drawers by either pushing down or pulling up on the handle located on the front of the drawer. The handle should have an indentation in its surface for your finger. If you need to push down, simply press down on the handle with your finger and the drawer should open. If you need to pull up, push in slightly with your finger and then pull up on the handle until the drawer pops open.

How do you remove drawers with center metal glides and no levers?

Some Craftsman tool chest drawers have center metal glides with no levers. To remove these drawers, you should:

  1. Pull the drawer out as far as it will go.
  2. Lift up on the drawer front while tugging gently towards you until the glides clear the tracks and the drawer is released from the tool chest.
  3. Once the drawer is removed, check the back side of it for any screws or other fasteners that may have been holding it in place.
  4. Remove any screws or fasteners you find and then reinsert the drawer into the tracks on your tool chest to make sure that it slides properly and locks securely before returning all of your tools and supplies.
  5. To return the drawer, simply reverse the process outlined above until it’s fully secured in place.

With the drawers properly installed, you can feel confident that your tools and supplies are safe and secure within your Craftsman tool chest.

Useful Video: Craftsman 41″ Tool Cabinet. Fix Stuck Drawers! (CMST82772RB)


By following the steps outlined in this guide, you should now know how to open Craftsman tool chest drawers. Remember to always keep the key safe and secure, as it is the only way to gain access to your tools. Make sure that your tools are properly organized and stored, so that you can find them easily when needed. By taking the time to learn how to open Craftsman tool chest drawers, you’ll be able to access your tools more quickly and easily. Enjoy working on your projects!


  1. https://toolvisit.com/how-to-open-craftsman-tool-chest-drawers/
  2. https://suggesthow.com/how-to-remove-drawers-from-craftsman-tool-box/
  3. https://www.homedepot.com/b/Tools-Tool-Storage-Tool-Chests/N-5yc1vZc2gk
  4. https://www.amazon.com/vdp/0ede5d5eedae46c58e899fe44e0424f7