Success usually comes to those who are too busy to be looking for it.Henry David Thoreau

5 Best Electrician Tool Belts

Best Electrician Tool Belts

Most recommended
Bucket Boss 50100
  • Fits up to a 52” waist
  • Reinforced pouch bottoms
  • Single body construction
A good choice too
Gatorback B240
  • 36″- 40″ Waist
  • Leather-Tipped Belt
  • Carrying Handles
A good choice too
Custom Leathercraft Belt
  • 29″–46″ Waist
  • 20-Pockets
  • Single roller buckle
Gatorback B145
  • 36″-40″ Waist
  • Leather-Tipped Belt
  • Carrying Handles
Gatorback B240C+
  • 31″-34″ Waist
  • 27-Pockets
  • Built Tough

Choose the Best Electrician Tool Belt

Customer’s Choice: the Best Rated Electrician Tool Belts

15 users answered this survey. Please help us improve this review!

60% of users selected Bucket Boss 50100, 13.33% selected Gatorback B240, 20% selected Custom Leathercraft Belt, 0% selected Gatorback B145 and 6.67% selected Gatorback B240C+. Every month we analyze your answers and change our rating.

The best electrician tool belts are those that provide the most comfort and utility. It is important to find a belt with features that will make your work easier, not harder! 

Pros of electrician tool belts:

  • They are lightweight and easy to carry around;
  • The belts give you more room for supplies with larger pockets. You can also use the side loops on a belt as another compartment to store your tools or an extra piece of clothing, like gloves in wintertime. This gives you quick access without having to open up one of the large tool pockets;
  • If they have heavy-duty zippers that go across both sides it makes them much harder for someone else to try and break into while not being obvious about what is inside (like some other bags). It’s also good if there are straps so keys don’t fall out when running from site job to site job;
  • The belts are usually made of a thicker, more durable material. This helps the belt hold up for longer and also is better at preventing wear spots from tools digging into your waist. They are less likely to rip or tear when you’re running around with them all day long because they don’t have as many seams in them that could easily get ripped open;

If you’re an electrician, then you know the importance of a good tool belt. You need one that is durable and holds up to all the tasks that are thrown your way day in and day out. There are tons on the market, but figuring out which is best for you can be challenging. That’s why experts have compiled this article! The goal is to help provide guidance about what features matter most when looking for a new electrician tool belt so that it will work for your needs and requirements.

Bucket Boss AirLift Tool Belt with Suspenders – the Editor’s choice!

The AirLift Tool Belt from Bucket Boss is super sleek and sophisticated – making it the perfect choice for anyone who’s on the job.

Lightweight, easy to wear, and adjustable up to a 52-inch waist with reinforced pouch bottoms and Infinity belt fit technology, your tools will always be nearby when you need them most. Adjust to any size waist and get a practical, life-saving belt for the most demanding jobs. You’ll feel like an absolute boss with this tool belt!

  • The pouch bottoms are reinforced;
  • Fits up to a 52-inch waist;
  • Super-capacity pouches;
  • Single body construction;
  • Adjustable rigging system;
  • The material may push some tools of the pockets;
  • The tape measure holder is poorly placed;

Bucket Boss has got you covered with their AirLift Tool Belt with Suspenders. The adjustable pouch and rigging system gives more flexibility for longer belts, or can be removed altogether to wear a shorter belt.

Gatorback B240 Electrician’s Pro-Comfort Belt – the best for back support!

The Gatorback B240 Electrician’s Pro-Comfort Belt is the ultimate everyday tool belt. It was made with hours of input from professional electricians who wanted a gear belt that would offer them all the benefits they needed on jobsite, without weighing them down or breaking their wallet in the process.

It is ventilated, made of 1250 DuraTek nylon that provides a lightweight for easy mobility. Featuring air channels to keep you cool and reduces sweat on your skin while maintaining maximum strength in every stress point rivet and bar tack construction.

This heavy-duty utility belt not only keeps your tools safe during rugged conditions, it also makes sure you’re feeling fresh no matter how hard you’re working.

  • Durable;
  • Ventilated material;
  • 36-40 inches for a waistline;
  • One-year defect free warranty;
  • Every stress point is riveted;
  • An interior plastic lining to have a box shape;
  • The Velcro stitches are bad;
  • The hook and loop on the padded belt are almost useless;

The tool belt features back support with reinforced stitching for durability so you can spend more time doing work not taking care of your discomfort!

CLC Custom Leathercraft 1614 20-Pocket Tool Belt System – the best for an adjustable waist!

Enhance your workflow with CLC Custom Leathercraft 1614 20-Pocket Tool Belt System! This sturdy tool belt has an easy-to-adjust padded waist belt with a single roller buckle and quick-release button. The adjustability is unbeatable at 29 – 46 inches, giving anyone the perfect fit – even the big guys!

The belt is designed for use as a safety harness for added security on job sites too. It also features convenient pockets that stay open – perfect for quick access when you need it most. These seams are double reinforced to be strong enough to last through rugged conditions while still being comfortable – no more sore backs.
  • Adjustable waist system up to 46 inches;
  • Easy access to any tools;
  • 20 pockets;
  • Padded belt;
  • Back support;
  • Even weight distribution;
  • 4 holes in the belt are not functional;
  • Too bulky;
  • The left bag stitches come apart;

The CLC Tool Belt System has been designed with the average worker in mind. It comes complete with an ergonomic design that will evenly distribute weight and ease strain on troubled lower backs and hips.

Gatorback B145 Triple Combo w/Pro-Comfort Belt – the best for durability!

Gatorback is all about giving you comfort with your everyday carry. With a built-in mesh liner, you’ll be able to forget about sweaty waistbands and uncomfortable pressure points. Gatorback tool belts are designed for versatility as well, making them perfect not only for EDC (everyday carry) but also jobs that require safety gear, hiking trips or even just running errands.

Also, every Gatorback product comes with a 1-year full defect warranty. The in-built belt sizing system ensures a custom fit to last for years, while the innovative plush lining gives you all day support without feeling like it’s constricting your back at all.
  • Durable construction;
  • Breathable nylon material;
  • Large;
  • Interior plastic lining for a box shape;
  • One-year defect free warranty;
  • The hammer hanger is in the wrong place for some users;
  • The Velcro stitching on the left bag quickly comes undone;

The Gatorback B145 belt combines comfort with durability and style. All Gatorback pouches are made with heavy-duty 1250 DuraTek nylon as well which allows them to be both rugged and lightweight.

Gatorback Electricians Combo Deluxe Package – the best for versatile use!

You’ll stay cool with the Gatorback Electrician’s Combo Deluxe Package due to its breathable duraTek 1250 fabric with bar-tack stitching and metal rivets at all stress points. The right side pouch has 18 pockets including a tape chain while the left half has nine pockets, very convenient for nails.

This is made even more helpful by not having leather or suede against your skin that could cause itchy sweaty clothes when worn over long periods of time like other belts do – no more need for anti-fungal creams too!

Save time with this convenient combo package that includes everything you need for a successful project – the tool belt combo, suspenders, gloves​ (just add a drill).

  • Versatile use;
  • Metal rivets and bar-tack stitching at all stress points;
  • Anti-sweat material;
  • Includes fingerless gloves and suspended drill holster;
  • 18 pockets and a tape chain;
  • The drill holder is flimsy;
  • Lengthy tools won’t fit;

The Gatorback Electrician’s Combo Deluxe Package is the ultimate way to accessorize your job site. With features like metal rivets and padded fabric, you will be able to work all day in comfort, and the gloves protect your hands so you can grab nails without fear of punctures.

The Buyer’s Guide

How does it work?

Electrician tool belts are designed to help electricians carry their tools and keep them close at hand. They make it easier for an electrician to perform tasks on a ladder or in tight spaces, while also keeping accountability of the tools as they go about completing the job. 

The belts have pockets that range in size from small ones meant for screwdrivers and pliers up through larger pockets that can hold power drills and other heavy-duty equipment. Some belts come with loops, clips, or chains so users can hang certain items off their tool belt including hammers and pry bars.

How to choose an electrician tool belt?

1) Materials:

  • Nylon. Commonly used for low-cost tool belts. Not recommended because it is not flexible and wears out quickly at the seams;
  • Leather. High-quality material that lasts a long time with proper care, but can be expensive to replace when necessary. Provides more comfort than nylon belt materials in warm weather conditions due to its ability to breathe. Oiled leather is the best of both worlds, this option combines the durability and breathability of leather with a surface that is easy to clean;
  • Kevlar. The most durable option on this list, Kevlar has been popularized by law enforcement officers who need something tough enough to last through daily use of their tools;
  • Polyester. A synthetic material with high tensile strength. Polyester is a popular choice for tool belt manufacturers and it has great resistance to abrasion, chemicals, ultraviolet light as well as oil and grease;
  • Foam padding. Reduces the risk of injury from heavy tools that could otherwise cause pressure points on your lower back while carrying them around all day long. Can be custom-fitted to fit different body shapes by adding or removing blocks of foam padding until they are comfortable for you. The downside is that these belts can’t provide more support than just providing a cushion against sharp edges – it’s not going to stop you if you fall off something high up like scaffolding;

2) Size and adjustability

One of the most frequent questions we get about electrician tool belts is whether they are adjustable. The answer to this question will depend on what style you have, but in general you can expect a range from 25”-59” waist size for an average belt and 32″ – 66″ for XL belts. Some models also come with removable suspenders so that it’s easy to find your perfect fit!

3) Belt length

If you are tall, then it’s a good idea to get a belt at least four inches longer than what is standard for an average person. The extra length will allow you to thread your pants through without them getting caught on the tool loops or anything else and also make sure everything sits correctly across one half of your body instead of being too high up.

4) Color

You should choose something with colors other than black – because it can show dirt more easily and be hard to clean. For brown belts, tan looks best if you want something neutral that goes well with most clothes as opposed to blue which might not go very well with some outfits.

5) Customization

Customization is a key element to finding the best electrician tool belts. Even if you already have your own belt, many people prefer using an adjustable belt that fits their workwear needs perfectly. A belt that can fit tools, cables, and even a phone without having to adjust anything is the most convenient option for some.

Customization comes in many shapes and sizes when it comes to electrician tool belts. Some people prefer elastic loops on the side of their kit while others want more pockets all around so they have easy access to different items at any given time. It’s important not only to look at what type of storage you need but also how much weight needs to be carried by your belt depending on your work environment or job description.

6) Purpose

The most important thing to consider when choosing an electrician tool belt is the purpose. You can find a wide variety of belts that are designed for different purposes, so it’s important to note what you need one for before making your choice. 

For example: if you work in construction or landscaping, then a heavy-duty belt would be best suited for those jobs whereas if you’re doing more light-duty wiring and smaller tasks around the house, then a more lightweight version might suit your needs better. 

7) Comfort of wear

You should also choose something that is comfortable for you to wear. Some belts have additional features, such as waist support and wider straps, which can make them more suitable for heavier loads than others. It’s important not just to think about what the belt will be doing – but how it affects your posture when worn all day long!

8) Durability

The first question to ask before buying an electrician tool belt is how durable it will be. Many of these models are built with high-quality materials and should last quite some time depending on your level of usage. For example, if you only have light-duty jobs around town and don’t switch tools often, this may not be such a big deal but if you do heavy-duty work in harsh conditions then durability becomes paramount. When choosing between two belts at the same price point there’s no way to know for sure which would make a better buy without knowing the full story.

9) Organizational ability

Tool belts are not just about carrying tools. Your belt can also be a convenient and organized way to store your keys, wallet, cell phone, tape measure, or any other things that you will need for the job at hand. When selecting an electrician tool belt, it is important to find one that has plenty of pockets where you can keep these items neatly tucked away. 

The best electrician tool belt would have enough size so as to provide room for everything from small tools such as screwdrivers and pliers in its various compartments on the outside while having more internal storage space inside for larger equipment such as hammers or saws.

The number of pockets may vary between models but most come with either six external slots or five along with an interior zippered pouch.

Some models also come with a built-in hammer holster so that you can easily store your work tools right on the belt while others have slots for storing additional equipment such as tapes or line levels, and many will provide loops to carry extra rolls of wire inside the pouches. The best electrician tool belts are made from durable materials like leather that are typically more resistant to wear and tear than other fabrics such as canvas.

10) Storage capacity

Which is the best electrician tool belt for your job? It depends on how much gear you need to carry. Take a moment and think about what tools, additional supplies or materials are needed when working as an electrician. If it’s just a few screws then a basic small-sized tool pouch will do! 

But if it’s more than four different screwdrivers, there are two kinds of belts with higher storage capacity: one has many pockets in which to store individual items and another carries everything inside its own compartmentalized spaces so fewer things can have their place at all times.

The first type of belt is more versatile because it can be used for a variety of tasks. The second kind, with the compartmentalized spaces, does not allow items to shift around during use and may seem more comfortable on your back since there’s less weight bearing down all at once. It also has an extra pocket specifically designed to carry tools that you need right now – sometimes called “transit pockets”. 

11) Popular manufactures:

  • DeWalt. Popular brand for tool belts among electricians because they’re designed so you can carry heavy loads without discomfort. It comes in different sizes from small to XXL in order to be able to fit more body types comfortably. Usually, these belts include a 16-inch wide nylon belt strap, two side pockets (one right pocket and one left pocket), six loops on each side of the belt system, an adjustable waistband that fits up to 46 inches, reinforced stitching at stress points for long-lasting strength as well as metal hardware like rivets;
  • Gatorback. These belts are very popular in general, and their belts are durable enough to hold up for any long-term use on professional job sites or around your home. The heavy-duty nylon fabric will cover most large tools with ease, but there are also options made specifically for more compact tools as well;
  • ESR. The brand offers a high quality belt for professional electricians with reinforced stitching and metal buckles. This belt usually includes two large pockets on the back of the tool belt, one smaller pocket at the top right side as well as two small loops to attach your hammer holder or tape measure clip (the company also offers these products separately);
  • Klein Tools. It provides an adjustable nylon strap that fits up to 48″ waist size and includes four deep utility holders–one in front near the buckle, one on both sides and one between those two for easy access while you’re working. It is available in three sizes from extra small to XXL so it can fit more body types comfortably. Klein Tools belts offer reflective strips that make them easy to spot in the dark which is good for safety;
  • Uncle Mike’s. It provides a wide range of belt sizes from small to XXL so they have something that will fit everyone, as well as an adjustable lumbar strap and six loops on each side for carrying tools. The heavy duty buckle is also designed for easy use with gloves or when wearing work boots because it can be fastened with one hand and locks easily without coming undone while you’re working;
  • Tekton. It offers 18 pockets including two large back pockets, four deep utility holders upfront near the buckle (one at either end) plus another smaller pocket between them; there are also twelve slots available on each side of the tool belt. The belt is adjustable and fits up to a 48-inch waist size, which can be adjusted by sliding the four snaps on either side of the tool holder;
  • Kodiak. A tool belt includes an 18-inch wide nylon strap made from heavy-duty webbing material with reinforced stitching at stress points so they don’t break easily like some belts do over time where it’s not reinforced; also includes four loops on each side of the belt system in order to hold your heavy tools and a reinforced metal buckle;

Types of electrician tool belts

There are 3 types of tool belts that electricians use. The traditional type has a pouch on one side and loops for the pliers, hammer, screwdriver, wire cutter/stripper on the other. It is recommended to have an inner pouch in case you need to store something small like bits or nails while working with your hands-free. Pouchless versions don’t have any pockets but instead have straps that can be used as holders when needed. This belt comes without any tools attached so it’s easier to clean up after work hours if necessary. 

Lastly, there are crossover models which combine features from both styles into one product (typically more expensive). Each style provides different benefits such as storage capacity and accessibility. Therefore, choosing the right belt for the job is important.

The traditional tool belt is the most common style that electricians use. While there are some pouches in this design, they’re typically not as large or deep because of their size and weight. In addition to a pouch for storing small items like screws or nails, it also has loops for pliers, hammers, and screwdrivers which can be accessed without taking off the belt. 

In terms of accessibility, thanks to having two sides with tools attached (the front side hooks first), this style provides easy access when needed. However, at times its hard to reach around back pockets while working on an electrical box from one side so cross-over designs are recommended instead if you need more storage space but still want quick access – these belts are usually adjustable so they can be put over the shoulder for easy access.

1) Designs

Tool belts come in three different types, with the choice mainly being based on personal preference:

The first type is a one-piece belt that wraps around your waist and has pouches or loops for holding tools. It also usually includes an adjustable strap to adjust how tight it feels around you. These are often called “pancake” tool belts from their shape when laid out flat on a desk.

The second option is two separate belts worn at the same time. This harness style involves both straps going over each shoulder instead of just one like with pancake tool belts. This version can be more comfortable depending on individual body size and likely offers more support than single options since they sit closer to where weight needs to be distributed.

The third option is a fanny pack-style belt that has pouches that can sometimes detach from the strap, or are attached and cover your entire stomach area to provide easy access to tools while on site with less worry of losing anything. This style is often chosen by people who don’t want the feeling of being weighed down all day long but still need quick tool access for when they need it. It also allows them to wear traditional pants instead of having belts around their waistline as pancake tool belts do.

2) Layers

Tool belts are typically made up of 3 layers: the outer layer, inner lining, and padding. The outer layer is usually a durable material such as canvas or leather. This allows for easy cleaning without fear that it will affect your tools on the inside. Inner linings can be padded with foam to protect more delicate items in your belt from being damaged by jostling about during work hours. 

Padding is important because you may find yourself sitting down at times while working which can cause pressure points if not taken into consideration when designing an electrician tool belt. Finally, most belts have either suspenders attached to them or they come with clips so you can hook them onto pants for added support and comfort throughout the day.

3) Tool loops

Electricians need loops that can hold their tools securely without stretching the material at all so they will be able to get back into them easily when needed. They should have closeable rivets as well as nylon webbing inside where possible that is good for holding screwdrivers, pliers and multitesters while allowing easy access by just undoing the fasteners. It’s also important that they hang over your waistband rather than directly below it, so that the weight of your tools doesn’t pull on your back.

Organizing electrician tool belt

A good belt should be customized to your particular needs. The best electrician tool belts are one-size-fits-all, they don’t have any pockets or loops for tools, but rather use elastic straps which can hold various items like pliers and screwdrivers securely in place on the side of the belt.

The more you customize your belt with specifically tailored pockets or sleeves that will fit essential hand tools such as drills and wire cutters, the better off you will be when it comes time to reach for what you need without looking around first. In addition, if you wear gloves regularly then make sure there is an easy way to put them away quickly without having to take them off completely every time.

It’s also important to consider the amount of weight you’re going to be carrying around when looking for a new belt. The heavier your tools, the more support and stability you’ll need from your belt in order to avoid back pain or injuries that can occur as a result of lack of adequate support.

The last thing we want is an electrician tool belt that has either too few pockets or too many. This will only lead to wasted time spent trying to find what you’re looking for while also making it more difficult than necessary on yourself because there are no designated places where things should go. Make sure everything has its place so that accessing them becomes second nature instead!

Electrician tool belt care

Dirt and grease can build up around the rivets of a tool belt and cause problems with weight distribution or even lead to rusting. Experts recommend cleaning your belt with liquid dish soap (like Dawn) on a damp cloth as often as needed: more frequently for dirty work environments, less frequently if you’re mostly doing drywall installation type jobs. And don’t forget that leather needs conditioning too – find out how below!

Tool belt care tips:

  • Rinse off dirt and grease with a damp cloth as needed;
  • Clean the rivets, metal parts, buckles etc., using liquid dish soap for extra effectiveness (like Dawn). Do not use bleach;
  • Use leather conditioner on your leather tool belts every six months or so to keep them in top shape;
  • Inspect your tool belt often for signs of wear or breakage. Replace rivets as needed to prevent them from coming undone during work hours – don’t wait until it’s too late;

The best electrician tool belts are made out of leather, nylon webbing, and metal hardware (like buckles). Nylon is waterproof so that it can be handy in wet environments but some people find it more difficult to thread their tools through than fabric belts. Leather is the most durable material but if you have allergies then you might want to consider a synthetic option instead: they also require less maintenance after purchase because they do not need conditioning or oiling. All belts need to be replaced from time to time due to wear and tear – don’t wait until it breaks during a job!


Do electricians need tool belts?

An electrician needs a good tool belt, but not necessarily for the same reasons as other handyman jobs.  Tool belts are important for electricians because they need to carry around all of their tools with them as they work. It’s not unusual for an electrician on the job site or in a home to be carrying anything from screwdrivers, hammers and wrenches to electrical tape, wire cutters, and pliers.

An experienced electrician will know which items must go where so that it is always easily accessible when needed (and this differs by region), but there has been some research into what is most often used on job sites – wire strippers being one example: these should probably live right at your fingertips!

Tool belt sets come with many features, like loops to hold different types of nuts and bolts together or pockets specifically designed for certain hand tools.

A good electrician tool belt should be comfortable, made from durable materials like leather and canvas with a wide waistband to distribute the weight throughout your lower back and onto both sides of your hips so that they’re not just hanging by one point on your hip bones as you work. The belts can also come in different lengths for people who are taller or shorter than average–something else to consider when purchasing!

Are Dewalt tool belts good?

The Dewalt tool belts are very popular among electricians. They have a combination of comfort, durability and affordability that make them one of the most recommended options for those in the trade.  With a wide variety of different options to choose from, you are sure to find the right belt for your needs.

The Dewalt tool belts have been designed with comfort in mind as they include features such as a padded lumbar that can support up to 130 pounds and be adjusted on the go. They also come with an adjustable waist belt that many people found really useful when dealing with heavy loads or long days on their feet. The best part is that this design doesn’t sacrifice durability either so if you are looking for something low-cost but high quality then these may be worth considering.

Are tool belts bad for your back?

Tool belts are considered bad for your back because they can place undue strain on the spine and cause pain. But not all tool belts are created equal, and some types of tool belts may be better than others at alleviating these concerns. Tool belt manufacturers have tried to address this issue by making their products more lightweight or using a more ergonomic design that reduces pressure points across the wearer’s body. 

This is one reason why it’s so important to think carefully about which type of electrician best suits you before buying one – you don’t want to get stuck with something that will make your workday even less comfortable.

In general, if you use any tool belt for more than two hours at a time, it may be worth considering a different type of product. It’s also important to make sure that the belts are high-quality and durable enough to stand up to long wear. If your old belt is getting worn out or feels too heavy on your body, think about switching over!

Do suspenders help with tool belts?

Suspenders are often a good alternative to criss-crossing your belt over the top of your pants. You may find that they allow more room for you which can be important if you have an extra-large stomach and backside. They also make it easier to get in or out of tight spaces like under furniture. 

This is one advantage, but there are some disadvantages as well

  • It’s harder to adjust straps on suspenders than when putting them directly through loops on the belt (and this might not work all that well even with suspender adjustments);
  • If the wearer has long legs, their bottom strap will constantly swing up into their crotch area while walking around lifting heavy objects;
  • People with a lower back injury might not be able to wear suspenders;
  • Suspenders are more difficult and time consuming to put on than belts because you have two straps that need to be adjusted;

The advantages of suspenders over the traditional design seem pretty slim when considering the disadvantages, which is why generally people still prefer tool belt suspender loops instead of using regular suspenders for their work clothes.

How long do tool belts last?

Tool belts can last anywhere from a few months to years if they are cared for properly. If you’re looking for tool belt longevity or durability, I recommend picking one made of leather because it’s the most durable material in this type of product. The best electrician tools come with a lifetime warranty that will cover everything about the belt except any lost parts like clips and clasps – and even then replacement items are available on Amazon!

How can you make your tool belt more comfortable?

When it comes to finding the best tool belt, comfort is the main priority for many professionals. To make your belt more comfortable, you can try using suspenders with pockets or get one of our tool belts without any straps at all. These types of belts are usually made for those who need to carry heavy items and tools on their person while they work in an office environment rather than carrying them from job site to job site.

Another suggestion is using a padded back support. These are made of soft foam and can be easily found at most hardware stores or department stores. Simply cut them to size if they don’t come in the desired size and place them between the shoulder blades with some tape. The fabric on these should match that which makes up the rest of your electrician’s overalls for ease of use when you need to get really dirty.

How do you adjust my tool belt?

It is typically not possible to adjust the belt size at once. The best way to make your tool belt as comfortable as possible is by wearing it for a few hours and adjusting how you sit, stand, or kneel on any problem areas with padding (such as an old pair of jeans). 

Many tool belts adjust at the waist. You’ll need to remove your belt, loosen it as far as you can with one hand (usually on your dominant side) and then undo the other buckle completely before trying to re-buckle it in a new position.

How to wear it?

The belt should be worn tight enough that it does not slide or move around, but loose enough to allow you to bend at the waist. It should hit right above your iliac crest and just below your rib cage. You want the tool loops in a position where they do not dig into your hips when bending over, which can cause back pain.

How to choose the right size?

For a standard size, take the belt length and add 12 inches to that length. For example, if you are 34″ long for your toolbelt (pants on), then 42″ would be the correct belt size. If you have special sizing needs or want more room in there so it doesn’t feel tight when reaching horizontally across you stomach area, please choose one of our custom sizes below:

  • Small belt size is 31-34 inches. The smaller option will provide ample space at the waistline but less storage options on either side of the hip area;
  • Medium belt size is 35-38 inches. This option provides ample space at the waistline and in both hip areas. It also provides more storage options across from one another on each side of the belt;
  • Large belt size is 39 inches or greater than 38 inches. If you are over a U.S. 36 size, this would be your best bet to maintain any weight considerations alongside plenty of room for attachments like air hoses, extension cords and other items that may differ in length among employees with different body types. The large sizing will provide an even amount of space around all sides while providing maximum comfort as well as many attachment loops inside the interior area where most tools hang out when not being used;

Are tool belts for electricians waterproof?

Tool belts for electricians are usually waterproof. The material that the belt is made of should be abrasion-resistant and water-resistant so it can protect tools from damage, especially if your job requires you to crawl around in wet locations like a warehouse or basement. 

If you’re looking at a tool belt with reviews by other users who work as an electrician, then they will likely have mentioned whether their tool belt was able to stand up against moisture and heat while still protecting its contents inside.

Video Tutorial: Electrician Tool

Final thoughts 

If you’re looking for a new electrician tool belt and want to make sure it will work well with your needs, then this guide should help. It provides guidance about what features matter most when looking for an electrician’s tool belt so that it will suit your requirements. Check out the helpful tips in order to get started!