- 41 Pocket
- LED light
- Easy to carry
- 22 Pocket
- Size: 11″ x 10″ x 19″h
- Easy to carry
- 31-35 Inches
- Maximum Comfort
- 43 Pocket
- Plastic tray included
- 23″l x 12″w x 15″h
- 28 Pockets
- Included premium case
- Extra Large (11″)
Choose the Best Electrician Tool Bag
Customer’s Choice: the Best Rated Electrician Tool Bags
17 users answered this survey. Please help us improve this review!
If you’re an electrician, you know you’ve got to take so many devices and gadgets with you everywhere you go. Carrying these tools is a hassle because there are instruments of varying sizes and forms. And carrying them in some plastic bags could damage them as well. Besides fishing out the correct tool can take a lot of time. Dedicated electrician tool bags could solve this problem easily.
This list shows the top 5 best electrician tool bags with various sizes and selection of pockets.
Thanks to their simplicity, the tool bag is a necessary investment for any handyman. And when you choose to go for one, it’s essential to select the best one. Always pay attention to low-quality tool pouches that are not made to last for a long time. The bad news is that you may not realize the actual quality of a carrier until you use it. That’s why the top best electrician tool bags were reviewed to make your choice easier.
The comparison table will assist you in this choice as well. Just make sure to read all buying tips before the purchase.
Custom Leathercraft DEWALT DG5543 Bag – the best for easy access!
You may want to choose this bag with hardened edges and corners built to be abrasion-resistant, tear-resistant. Also, it has carefully placed bottom base pads.
The tool bag is compact inside and includes 13 interior pockets, along with a fully zipped pocket, suitable for safe storing of valuable tools. There are about 20 additional storage compartments, including a flap-closed pocket with a convenient hook and a loop closure. When it refers to usability, this Dewalt tool bag is convenient to carry and can be worn either by a flexible and lined shoulder strap or by a rugged top handle.What makes this Dewalt bag special is that it comes with quick tool access. You can conveniently access the appropriate resource without any ambiguity. The pop-open architecture renders it exclusive. There is a large internal space for convenient access to your gear.
CLC Custom LeatherCraft 1528 Tool Carrier – the best for design!
Besides, this pocket is the user’s solution to an easy-to-use, inexpensive device pack. Its design is the most important aspect of the package. When designed with the assumption that tool bags appear to fall over, his shape stops that from taking place.
The shoulder band comes with additional pads to make sure you don’t strain your arm when holding the bag. There are enormous pockets separated into elastic loops that help to hold big tools comfortably and maintain them in order.
Gatorback B240 Electrician’s Combo Belt – the best for back support!
This B240 belt is good to wear for a long time, the air conditioning mechanism is perfect and you experience the value of it. All the interior pockets come with additional plastic lining to provide extra safety.If you’re a fan of the convenience provided by the GatorBack back support system and just want a nice tool belt, pick this particular model.
Custom Leathercraft CLC 1530 Tool Carrier – the best for portability!
You will hold your camera, drill bits, electrical tester, and other items that you need while operating on a job. The window pockets for quick visibility of the equipment. You don’t have to battle until you can find the instruments. You’ll easily find them through the transparent top.
Jackson Palmer Tool Tote Carrier – the best for the size!
The pocket will carry up to six pounds of equipment. The structure is based on a quick access to equipment when operating. There are plenty of side pockets for quick access to instruments. Basically this is a sturdy rubber bottom pocket that stops water from getting saturated while operating in damp environments.
The Buyer’s Guide
The most popular electrician tool bags are made of nylon, polyester and plastic. Why these materials are picked by the manufacturers:
- Nylon is a synthetic material. Much cheaper than the polyester, but less resistant to damage. It is also resistant to water and can withstand significant capacity;
- Plastic. Thick plastic does not bend and is easy to wash. But it may easily crack if dropped from a decent height;
Adequate storage capacity is a major plus — it helps you to store and move enough resources and equipment at all times. The kind of room you need depends on the type of job you need to do. The harder the job, the more space and tools you may require. Registered electricians and mechanics are expected to require more room and equipment than the average mechanic and repair person needs.
Shoulder holders and waist belts are also useful, but they don’t hold much of the tool. It is useful for locksmiths, electricians who need to work in difficult places. These experts can’t take the whole set of tools, so they use bags. And the use of bags does not involve your hands but allows getting the necessary instrument quickly.
You can have sufficient space for your equipment and gadgets, but your bag must still be robust enough to handle anything you need for whatever job entails. You would be able to rely on a bag that lasts for at least five to seven years without thinking about it. If you’re the sort of person who’s hectic with their equipment and packaging, you would like to pay particular attention to the fabric your bag is constructed of.
Nothing is better than getting a spot in your pocket for anything you may use. Straps and loops on the outside and inside of your bag should make the transportation of your valuable instruments more comfortable. A multi-compartment layout is designed especially for tape measuring, electrical tape, small instruments, and so on is the best part of the kit. A compartment tray can often be of use for storage and organization.
It helps to have what needs to be sorted as clear, safe, dry and secure. It’s especially good if it slides in and out like a fan. Flap compartments are ideal for concealing or holding items separate and safe. Windows compartments have a function because you need to be clear at a glance what you have and what you will require.
Precautions to keep in mind when choosing an electrician tool bag:
- Sufficient stitching. This aspect can’t be compromised. Double check the straps and handles as well to prevent any ripping apart when transporting the tools;
- Plastic trays seem a good addition to tool bags. But if they are made of thin plastic then the cracks under the weight of the tools inside the bags are possible. Besides, it is hard to place these trays evenly in the bag;
- Invest in the bag with durable padded handles;
- Waterproof exterior fabric and side panels can add extra protection;
Video Tutorial: Electricians Hand Tools
Now you have detailed reviews of top 5 electrician tool bags so the choice should become a little bit easier. Just do not neglect the expert opinion and buying tips – choose the premium quality at reasonable prices. Also, make sure an electrician tool bag suits your requirements and can hold all your instruments safe during transportation.