5 Craftsman Tool Box Keys

The Buyer’s Guide

Reasons You Have No Toolbox Key

Lost Key

In most situations, if you’re searching for how to open a locked toolbox without a key, it’s because you’ve misplaced the key. If you can locate your lost key, great; but we’ll go ahead and assume that isn’t an option. When this happens, the lock should operate properly and allow you to use any of these techniques to open a toolbox without a key [1].

Broken Key

A broken key is a little more difficult to deal with than a lost one. In this case, you’ll have to remove the broken key from the lock before you can proceed.

There are a few ways that you can do this, but experts recommend using a pair of needle-nose pliers. Start by inserting the tips of the pliers into the lock and feel around for the broken key. Once you’ve located it, use the pliers to grip it and pull it out. If there’s any resistance, wiggle it back and forth until it comes free.

With the broken key removed, you should be able to use one of these other methods for opening your locked toolbox without a key.

Broken Lock

When a toolbox lock goes, the key or the key might remain in it, so there is no working key because there is no functioning lock. You may have broken your key due to a faulty lock aside from keys not inserting or one getting stuck in the lock. There’s nothing to save if your toolbox lock breaks since it does not function.

You’re still looking for a way to open a locked toolbox without using a key, but you can’t do it with bypasses or lock picking. Concentrate on destructive entry, which will necessitate the replacement of the lock. There is no actual loss since the toolbox lock had already been replaced, therefore there’s no point focusing on it.

Main Features

Durability of Materials

We’ve all had that one keychain that just fell apart after a few months of use. The same can be said about many things in our lives, but it’s especially important when it comes to the things we depend on every day – like our tools. That’s why these keys are made from high-quality materials that are built to last.

You can rest assured knowing that your keys will stand up to whatever you throw at them – whether it’s being dropped, tossed around, or even stepped on. And if by some chance they do break, Craftsman offers a lifetime warranty so you can get a replacement set free of charge.

Size Matters

The keys for your Craftsman toolbox should be also designed of the perfect size to fit just right – no more or less. That means they can’t be too big or bulky, so they won’t get in the way when you’re working. And they’re not too small either, so you can easily find them when you need them.

In short, these keys are just right – and that’s something you can always count on with Craftsman.

Color and Coating

Craftsman toolbox keys also come in a variety of colors and coatings. Whether you want something that’s easy to spot or blend in with your tools, there’s a key for you.

And if you’re concerned about the environment, Craftsman has you covered there too.

FAQ

How do you unlock a Craftsman toolbox without a key?

If you have lost the key to your Craftsman toolbox, or it has been damaged beyond repair, you can use a universal lock pick set to unlock it.

Anyone can do this relatively easy process with the proper tools and a little bit of practice [2]:

• First, insert the tension wrench into the bottom of the keyway. This will allow you to apply pressure to the pins as you manipulate them with the pick;
• Next, insert the pick into the keyway and begin feeling for each pin. As you feel each pin, apply pressure with the tension wrench until it feels like it is about to give way;
• Once all of the pins are set, turn the tension wrench and the lock should open;

With a little bit of practice, you should be able to unlock most Craftsman toolboxes without any issue. If you are having trouble, there are plenty of resources available online that can help you out.

Where is the Craftsman toolbox key code?

A key code is a type of identification number that is assigned to each lock, similar to the combination for that specific lock. It’s stamped on your key or the face of your lock if you’ve lost yours.  The key code can be used to order a replacement key for your lock [3].

To find the key code for your Craftsman toolbox, look on the face of the lock (where you insert the key). The key code will be stamped there, usually beginning with “C” or “CN”. If you can’t find the key code, check your owner’s manual or contact Craftsman customer service.

Once you have the key code, ordering a replacement key is easy. You can order keys by phone or online from a variety of retailers, including Sears (the parent company of Craftsman). Be sure to have the key code and/or a picture of your lock handy when ordering, so that the retailer can match you up with the correct key.

Can a locksmith make a key for a toolbox?

If you have lost the keys to your Craftsman toolbox, or if you have a new toolbox that did not come with keys, you may be wondering if it is possible to get replacement keys. The good news is that yes, you can get replacement keys for your Craftsman toolbox.

You will need to take the toolbox to a locksmith and they will be able to make a key for you.

Keep in mind that this will likely be a bit more expensive than buying a new set of keys from Craftsman, but it is still worth it if you want to keep using your existing toolbox.

How do you open a Craftsman toolbox drawer?

To open a Craftsman toolbox drawer, you’ll need to use the key that came with your box. If you don’t have the key, you can contact Craftsman customer service to order a replacement [4].

Once you have the key, insert it into the lock at the front of the drawer. Then, turn the key to the left until you hear a click. This indicates that the drawer is unlocked and ready to be opened.

To close the drawer, simply push it shut until it locks into place. You’ll know it’s locked when you hear a clicking sound coming from the lock.

How do you remove a drawer without a lever?

If you need to remove a drawer without a lever, you can use a putty knife or a flat-head screwdriver. Gently insert the blade of the tool between the drawer and the opening of the cabinet. Apply pressure to the tool handle until the drawer pops out.

Once you have removed the drawer, locate the retaining screws that hold it in place. These screws are usually located on either side of the cabinet opening. Use a Phillips head screwdriver to remove these screws and then lift out the drawer.

Video Tutorial: Unlock a Craftsman Toolbox in Seconds

Final thoughts

Losing your key can be a major inconvenience, but it doesn’t have to ruin your day. If you have the model and the serial number of your toolbox, you can easily order a replacement key from Craftsman customer service.

In addition, our experts have put together a comprehensive guide on the best Craftsman toolbox keys.

So before you lose your key, be sure to check out our guide! And finally, here are some tips on how to prevent losing your keys in the first place.

References:

1. https://unitedlocksmith.net/blog/how-to-open-a-locked-toolbox-without-a-key
2. https://toolsvine.com/open-locked-toolbox-without-a-key/
3. https://www.ncertpoint.com/2022/01/how-do-i-get-a-replacement-key-for-my-craftsman-toolbox.html
4. https://mytoolsmyrule.com/how-to-remove-drawers-from-a-craftsman-tool-box/